|HOW TO USE OUR TWO PIECE
METAL MOLD STANDS
|Our two piece metal mold stands are the perfect compliment to all of our
two piece plastic SpiritCrafts candle and soap molds.
When you receive your mold stand, you will see something like what is
pictured to the right. Each mold stand is two pieces.
|Each of the two pieces of the mold stand is the same. When used,
the two halves of the mold stand will face each other with the "legs"
facing each other.
|On each half of the mold stand, you will see a slot cut into the
top and the base of the stands. These slots allow your
plastic mold to slide into the stand and be held in an upright
position during the pouring process.
|Once your plastic mold is clamped together, it will slide into
the grooves of the mold stand. Each side of the stand
slides onto the mold as pictured to the left. The clamped
mold rests in the slots on top of each side of the stand and
is held upright during the pouring process.
|This is how your mold and mold stand are used in conjunction to
hold your plastic molds during the pouring process. Because the
mold stand comes in two halves, it can be adjusted to hold molds
of any width.
|ALL CONTENT IS PROPERTY OF